Full Scale Plans (10 Sheets)
Laser Cut parts
Fiberglass Cowl (2 piece)
Fiberglass Scoop
Fiberglass Wheel Pants
Clear Canopy
Aluminum Landing Gear
Aluminum Cabanes
ITEMS REQUIRED TO COMPLETE KIT:
WING TUBES
2 REQ’D. 1 1/4″ DIA. X 48″ LONG, FOR TOP AND BOTTOM WINGS.
1 REQ’D. 1/2″ DIA. X 15″ LONG, FOR BOTTOM WING, ANTI ROTATION PIN
WING TUBE SOCKET:
1 REQ’D. 1 1/4″ DIA. X 22 1/4″ LONG, TOP WING, CENTER SECTION.
2 REQ’D. 1 1/4″ DIA. X 13″ LONG, TOP WINGS, OUTER WING PANEL.
1 REQ’D. 1 1/4″ DIA. X 7 3/4″ LONG, BOTTOM WINGS, FUSELAGE.
2 REQ’D. 1 1/4″ DIA. X 20 1/2″ LONG, BOTTOM WING PANELS.
2 REQ’D. 1/2″ DIA. X 3 3/4″ LONG, BOTTOM WING PANELS, ANTI ROTATION PINS.
WOOD:
10 REQ’D. BASSWOOD STRINGERS – 1/4″ X 1/4″ X 48″ LONG, (2) FUSELAGE, & (8) WINGS.
16 REQ’D. BASSWOOD STRINGERS – 3/8″ X 3/8″ X 48″ LONG, FUSELAGE.
31 REQ’D. BALSA STRINGERS – 1/4′ X 1/4″ X 48″ LONG, (13) FUSELAGE, & (18) WINGS.
2 REQ’D. BALSA STRINGERS – 3/8″ X 3/8″ X 48″ LONG, (2) FUSELAGE.
2 REQ’D. BALSA STRINGERS – 1/2 X 1/2″ X 36″ LONG, (2) FUSELAGE.
3 REQ’D. BALSA – 1/4″ X 1/2″ X 48″ LONG, (2) HORIZONTAL STAB. & (1) VERTICAL STAB. & RUDDER.
9 REQ’D. BALSA – 1/4″ X 3/8″ X 48″ LONG, (4) HORIZONTAL STAB. & (1) VERTICAL STAB. & RUDDER, &
(4) TRAILING EDGE, AILERONS.
4 REQ’D. BALSA – 1/2″ X 3/4″ X 48″ LONG, (2) HORIZONTAL STAB. & ELEVATORS & (2) VERTICAL STAB. & RUDDER.
8 REQ’D. BALSA – 1/2″ X 1 1/2″ X 48″ LONG, (4) LEADING EDGE OF THE WINGS, & (4) LEADING EDGE OF AILERONS.
4 REQ’D. BALSA – 3/8″ X 1 1/2″ X 48″ LONG, (4) TRAILING EDGE OF WINGS- (HINGE LINE).
35 REQ’D. BALSA SHEETS 3/32″ THICK X 4″ WIDE X 48″ LONG, (14) FUSELAGE & (21) WINGS.
